Professional Pressure Washer Soap Injector Kit – The Ultimate Solution for Restoring Chemical Dispensing Performance

When your pressure washer's down stream injector starts malfunctioning due to clogs, rust, or wear, this comprehensive 2-pack replacement kit provides everything needed to get your equipment back to peak performance.

Installation Guide:

1️⃣ Shut off and depressurize your pressure washer

2️⃣ Remove old injector using a standard wrench

3️⃣ Thoroughly clean the injector port area

4️⃣ Install new O-ring on replacement injector

5️⃣ Insert check valve ball and spring

6️⃣ Secure with brass barb fitting (hand-tighten plus 1/4 turn with wrench)

Package Contents:

2 x Chemical Injector Assemblies

2 x Check Valve Balls

2 x Brass Barb Fittings (1/8"-27 BSP thread)

2 x O-Ring Seals

2 x Replacement Springs

⚠ Important Note:

Always match part numbers before installation

Do not overtighten – use 13mm wrench for final snug fit only

Inspect O-rings regularly for wear

Restore Your Pressure Washer's Performance – Order Your Professional-Grade Injector Kit Today!