Brake Caliper Less Tool Advrepair Brake Caliper Less 360 Degree Rotation Ratchet 2 Steel Plates for Car Maintenance Brake Pad Replacement Tool Piston Return High Strength Brake Caliper Less Tool
Brake Caliper Less Tool Advrepair Brake Caliper Less 360 Degree Rotation Ratchet 2 Steel Plates for Car Maintenance Brake Pad Replacement Tool Piston Return High Strength Brake Caliper Less Tool
- DISC BRAKE COMPATIBLE BRAKE CALIPPERLESS TOOL is equipped with two push boards: 7.01 x 2.36 inches and 4.53 x 2.17 inches and is suitable for most single and twin piston floating calipers, twin piston and quad piston fixed calipers or some 6-row piston spacing can accommodate spreaders. Please make sure it is OK)
- Operating principle: The spreader spreads out to push the board or retract when you finish pressing the board. (Adjust by switch) In magnification mode, a ratchet screw placed in the center creates uniform thrust on the press plate and allows simultaneous quick push of multiple pistons in the caliper. Effectively saves energy and greatly improves efficiency
- 【Sturdy Material】 Brake caliper compression tool is made of high quality carbon steel, high hardness and not easy to deform. Reinforced ergonomically designed handle for comfort and non-slip
- How to Use: Concentrally align the press plates on both sides to the piston, press both sides of the press plate simultaneously (until the press plate pushes the piston, press both sides to aid starting), shake the handle until the press plate is pressed into the correct position, finally, adjust the switch, reverse the plate and remove the spreader
- 【Size Reference】The size of the push board is 2 groups: 7.01 x 2.36 inches and 4.53 x 2.17 inches, stretch range: fully retracted: 1.88 inches, fully extended: 3.03 inches; 3.03 inches.
How to see if you need this tool?
1. Brake
2. Your disc brake system is a fixed caliper for twin, 4 piston, 6 piston or single or twin piston floating caliper.
3. Caliper pistons do not need to be turned when pushed back.
4. Spreader can be expanded from 1-1/2" to 2-1/2" for 2PCS small spreader plates, 2" to 3" for adding 2PCS big spreader plates.
If the caliper is wide, you can place the old pad on the side and push the piston back.
5. Save time and effort and protect your piston from wood chunks and C clamps.
Labor saving ratchet design
360 degree swing ratcheting spreader is easy to install in any direction and use.
Superior Spreading Plate
Four 1/8" thick spread plates keep parallel to distribute force evenly on caliper pistons.
Two small spreader plates for use with fixed calipers on twin and quad pistons or floating calipers on single pistons and twin pistons.
6 piston fixed calipers use two large spreader plates.
Handy lever handle
Red cushion lever handles are skid resistant and won't hurt your hands during use.
Convenient flip switch
The ratchet has a small positive and negative adjustment switch that can be flipped to extend the spread plate.
Attention
1. Wear gloves and goggles when using.
2. Brake Caliper PRESS Tool fits U
- Manufacturer reference: KT6043
- Product dimensions: 27 x 5.5 x 7 cm; 1.09 kg
- Manufacturer Part Number: KT6043
- Item Weight: 1.09 kg
- Model: KT6043
- Brand: Advrepair
- Manufacturer: Kuntech
-
In Stock