1. Fitment: The alternator pulley drill bit kit is replacement for alternators, replacement for Peugeot, replacement for, and cars with 33 teeth spline hole.

2. Parameter: The inner diameter of this spline tool is 12mm, the outer diameter of this spline tool is 20mm, the 33 teeth part length is 30mm, and the drill bit length is 75mm.

3. Function: The two part splinted wrench is used for removal and replacement of pulleys, while 33 spline cylinder on shaft is inserted into pulley locking bolt.

4. Premium Material: This wrench kit is made of sturdy steel material, provides a powerful mounting force while ensure wear, impact proof, and anti deformation.

5. Operation: Place the drill bit in the center hole of the hexagonal key and then place both in the center of the alternator clutch, fix the drill bit, rotate the spline nut to lock or unlock.

Specification:

Item Type: Alternator Pulley Drill Bit Kit

Material: Steel

Hex Part Length: Approx. 17mm/0.67in

33 Teeth Spline Part Length: Approx. 30mm/1.18in

Spline Outer Diameter: Approx. 20mm/0.79in

Spline Inner Diameter: Approx. 12mm/0.47in

Drill Bit Length: Approx. 75mm/2.95in

Fitment:

Replacement for Alternators

Replacement for Peugeot

Replacement for

Replacement for

Replacement for Fiat

Replacement for Seat

(Fits for any clutch pulley with 33 teeth spline hole)

How to Use:

1: Place the drill bit in the center hole of the hexagonal key and then place both in the center of the alternator clutch.

2: Fix the drill bit, rotate the spline nut clockwise to unlock the alternator clutch pulley, or reverse direction to lock the new clutch

packing list:

1 xDrill Bit

1 x 33 Teeth Spline