Specification:
Operation voltage: 6-24V DC
Cable length: about 4 m
Overload protection: 7A (When the current exceeds 7A, this item will disconnect the current automatically.)
Weight: about 200 g
Material Type: plastic and stainless
Item Length: 225 mm/8.85 inch
Lead Length: approximately 4 M/157.5 inch
Item Width: 30 mm/1.18 inch
Note:
1. Do not use the item around explosive gas, vapor, or dust. When the power switch is pressed(or rocket), battery current is conducted directly to the tip which may cause sparks when contacting the ground or certain circuits.
2. The unit is not to be used with 110/220v house current, it is only used for DC 6~24V systems. Do not use at AC voltage.
3. After you have completed your vehicle inspection, correctly restored all the connections which you disconnected.
4. Always follow the instruction and procedures indicated in the vehicle’s service manual before attempting to disconnect any part or subsystem of the electrical circuit.
5. Never touch any dangerous part of the vehicle with your hand for safety. Don’t touch any live conductor with your hand or skin.
6. Don’t use it if it is damaged.
7. Some components of vehicles work on low voltage, they cannot withstand the voltage allied by the item. To avoid damage to these components, don’t use the item to apply voltage directly or indirectly.
8. Before driving, please always make sure that the vehicle is safe and reliable.
9. Don’t use this item when driving.
Package List:
Car Power Circuit Probe Tester *1
User Manual *1