Compatibility:
Work for Ford (Following Models)
2002-2010 Falcon BA Series
2002-2010 Falcon BF Series
2002-2010 Fairmont BA Series
2002-2010 Fairmont BF Series
2002-2010 Fairlane BA Series
2002-2010 Fairlane BF Series
2002-2010 XR6 Models
2002-2010 XR8 Models
2002-2010 FPV Models
2002-2010 Territory SX
2002-2010 Territory SY
Please make sure that your vehicle model belongs to the above model. And your current remote looks the same as the one in the picture (433MHz frequency).
If you are unsure about compatibility, please reach to us before purchasing.
Programming Instructions:
1. Sit in the car with the doors closed.
2. Within 10 seconds of closing the door, insert the key into the ignition, turn to ACC position (accessories position, the first click) and press the rear demister button 3 times.
3. Within 5 seconds, door locks will cycle. If this fails, it has not successfully entered the learning mode. Please repeat the above steps.
4. You then press any button on the first remote to be trained, the door locks will cycle. Then press any button on the 2nd remote to be trained and the door locks will cycle again. Repeat this step for the rest of the remotes to be trained to the car. You can train up to 8 remotes.
5. Turn the ignition to the OFF position to exit the learning mode.
6. Your remotes are now programmed to your car.
7. Remove the key and get off the car, then test the remotes.
*Please Note: Once entering the learning mode, all remotes must be programmed. You will need to have all the remotes available for the car.
Package Includes:
1 x Aftermarket Remote (built-in CR2032 battery)
1 x Keychain
1 x Manual