QSDIYRF 3-Button Car Remote Control Compatible with Ford Falcon/Fairmont/Fairlane/XR6/XR8/FPV AU Series 2 & 3 1999-2002 AU2/AU3 Vehicle Models, 304MHz Complete Remote Replacement, 1 Pack
Compatibility:
Work for Ford (Following Models)
1999-2002 Falcon AU Series 2 & 3
1999-2002 Fairmont AU Series 2 & 3
1999-2002 Fairlane AU Series 2 & 3
1999-2002 AU XR6 Models Series 2 & 3
1999-2002 AU XR8 Models Series 2 & 3
1999-2002 AU FPV Models Series 2 & 3
Please make sure that your vehicle model belongs to the above model. And your current remote looks the same as the one in the picture (304MHz frequency).
If you are unsure about compatibility, please reach to us before purchasing.
Programming Instructions:
1. Sit in the car with the doors closed.
2. Within 10 seconds of closing the door, insert the key into the ignition, turn to ACC position (accessories position, the first click) and press the rear demister button 3 times.
3. Within 5 seconds, door locks will cycle. If this fails, it has not successfully entered the learning mode. Please repeat the above steps.
4. You then press any button on the first remote to be trained, the door locks will cycle. Then press any button on the 2nd remote to be trained and the door locks will cycle again. Repeat this step for the rest of the remotes to be trained to the car. You can train up to 8 remotes.
5. Turn the ignition to the OFF position to exit the learning mode.
6. Your remotes are now programmed to your car.
7. Remove the key and get off the car, then test the remotes.
*Please Note: Once entering the learning mode, all remotes must be programmed. You will need to have all the remotes available for the car.
Package Includes:
1 x Aftermarket Remote (built-in CR2032 battery)
1 x Manual
1 x Keychain