A longer detection range solves the problem of traditional motion sensors only turning on when a person is nearby.

When a separate sensor detects motion, it sends a signal to the solar light to turn on in advance. At the same time, the intelamp solar light sends a signal to trigger the same intelamp solar lights within a 100ft radius to turn on synchronously, illuminating a larger area

During the day, it recharges with solar energy and turns on automatically every evening when you press the ON button.

With the remote control, you can choose different delay times for light sensitivity to meet different needs:

30s: Short delay

3 minutes: Meets most needs

10 minutes: Remote workplace/business

The longer the delay time for high brightness, the higher the power consumption. We recommend choosing a 30-second delay to ensure continuous lighting during prolonged rain

No Motion Detection: Disable motion detection, automatically turn on the light at dusk and leave it on until dawn.

Brightness Control: You can set three brightness levels (100%, 80%, 60%) that work in both motion detection and non-motion detection modes. During periods of abundant sunlight, choose the highest brightness level; in winter, lower it to ensure long-lasting illumination.

The settings will be automatically saved, and the mode set on the day of installation will operate every day.

intelamp solar light comes with a rotating mounting bracket that allows it to be installed at any angle: on a wall, a tree trunk, a pole, a ceiling, a ground, or even upside down to illuminate the sky.

The external adhesive is fully sealed to ensure IP65 outdoor protection. Do not attempt to open it.

An illustrated guide and all installation accessories are included to ensure hassle-free installation.

A unique metal bracket maintains the solar panel's tilt angle at a constant 18 degrees over time, ensuring optimal charging performance and eliminating surface dust in rainy conditions.

The solar panel can be wall-mounted or attached to round or square poles.

The solar panel should be installed in a sunny, shade-free location facing south for optimal charging efficiency.

intelamp uses 5V 2.6A solar panels with a solar energy conversion rate of 22.5%, enabling faster charging.

It adopts a 3.2V 12,000mAh electric vehicle-grade power battery, which offers high safety and a long service life.