wide range of applications

Product Showcase

Step 1: The car needs to be fixed position clean, do not have dust adsorption position needs to be flat, suction cups press down, exhaust valve buckle down a little shake the suction cup will not move shaking proof of installation is complete.

Step 2: Take out the extension arm, loosen the knob in the middle of the extension arm and set one end into the suction cup ball head.

Step 3: Extension rod screw holes at the bottom, the 1/4 ball screws twisted in and rotated to the tightest, will not be loose can be.

Step 4: Put the double suction cups bracket flat on the need to adsorb the fixed position of the left and right 2 suction cups exhaust valve press down to check whether it is fixed firmly.

Step 5: install the extension arm and self-timer, the first middle of the rotating buckle twisted loose in turn into the suction cup ball head and extension rod ball head inside the final adjustment of the angle, knob lock on it!

Step 6: Adjust the angle of the extension rod and then fixed to a strong clip to lock the extension rod.

Product Assembly

Product Assembly

Installation details, see instructions for details.