PremiumCord 4K HDMI Mini Wireless Extender to 20 m, Full HD 1080p 60Hz, 5Gbps, HDMI1.4, HDCP2.2, Black
Wireless HDMI transmitter and receiver for 20 m connection.
Supports wireless transmission of Full HD 1080p 60Hz resolution
Easy to install without additional SW
Parameters:
- Maximum bit rate: 5Gbps
- WiFi frequency: 5 to 5.8 GHz.
- Supports video resolution: Full HD (1920x1080p) 50/60Hz, 1080i@50/60Hz, 720p@50/60Hz
- Supports HDMI1.4, HDCP2.2
- Supports SSID pairing
- Audio format PCM.
- Response time of less than 150 ms
Extender design:
- The transmitter is a small dongl that plugs directly into the HDMI port of your computer or laptop
- The receiver is a small dongle that plugs directly into the HDMI port of a monitor, TV or projector
- Input ports: HDMI port
- Output ports: HDMI port
- The extender is powered by the included micro USB cables that are plugged into a USB port or a USB power adapter
- The extender can work without external USB power supply if there is sufficient power through the HDMI port
- The transmit and receive adapters feature a short HDMI cable for easy connection to your computer and monitor or TV
- Transmission range depends on the respective environment
- Operating temperature: -20°C to 60°C.
- Humidity: 0-90% (non-condensing).
- Dimensions TX and RX: 40 mm x 200 mm x 15 mm.
- Weight TX: 40g, RX: 40g
- Black plastic housing.
Recommendations for uninterrupted wireless signal transmission:
1. Eliminate signal interference from other wireless devices and remove obstacles that get in the way of the signal (metal walls, glass, RF interference, etc. in the path of the signal)
2. The signal can also be disturbed by external environmental influences such as microwave ovens, wireless mice and keyboards
3. Make sure the transmitter unit is at least 20 to 30 cm away from the wall and is approximately in line with the receiving antenna of the device on the other side.
Package Content:
- 1 x transmitter.
- 1 x receiver.
- 2x USB - Micro USB cable for power supply of receiver and transmitter