* Data derived from ALTHY titration ideally on May 25, 2024 , Can't use electronic pen because its limit test is only 1200ppb.

Actual data is affected by water quality, temperature, PH.

NOTE:

1. Some models need to maintain the activity of the film. There is water at the bottom when leaving the factory. You may see water or mist when you open the bottle for the first time.

When using it for the first time, if there are large bubbles or no bubbles, the membrane needs to be activated again (add hot water to the bottle and leave it for 24 hours).

2. The number of continuous electrolysis times of the hydrogen generator cannot exceed 2 times. After each electrolysis is completed, the lid needs to be opened to release the pressure before the next electrolysis can be started.

3. The water bottle can only hold up to 90% of water and cannot be completely filled with water for electrolysis.

4. The package only contains a USB data cable. You need to choose a 5V1A or 5V2A charger plug for charging. Fast charging plugs are not supported.

5. Do not flush the base directly against the faucet. The base of the hydrogen generator is not waterproof, and flushing it against the faucet will cause water damage to the device.

6. Please read the instruction manual and related documents carefully before use.