Specification:

Item Type: Automatic Watering System

Material: ABS, PC

Body Size: Approx. 62 x 36 x 80mm / 2.4 x 1.4 x 3.1in

Working Pressure: 30PSI

Battery: Lithium Ion Battery 3.7V 1800mAh (Shipped with Built in Battery)

Flowing Rate: 0.8L/MIN

Suction Lift: ≥1.5m/4.9ft

Head: ≥2.5m/8.2ft

Hose Length: Approx. 5m / 16.4ft

Gross Weight: Approx. 408g / 14.4oz

How to use

1. cut the appropriate length of hose for the inlet hose and install a filter at one end;

2. install the inlet hose to the bottom air inlet of the unit;

3. Insert a spring clip at one end of the outlet hose to prevent the outlet hose from falling off due to high water pressure;

4. install the outlet pipe to the bottom outlet of the appliance and adjust the position of the spring clip.

5. install the tee according to the position of the potted plant and make sure it is firmly in place;

6. install the drip arrow or adjustable drip arrow;

7. lay the unit flat or suspend it with hooks or cords;

8. Switch on the unit and set the watering time as required.

Package List:

1 x Controller Host

1 x Hook

1 x Hose

1 x Spring Clamp

1 x Filter Head

6 x T Joint

6 x Drip Arrowhead

1 x User Manual

1 x Connection Cable

Notice:

1. Avoid placing the bonsai lower than the water source to prevent the siphoning effect which may cause water for flowing directly into the flower pot.2. Manual measurement, please allow some errors.