Item Type: Electric Circuit Tester
Material: ABS, metal
Application:
1. Continuity test
2. Test the polarity of the voltage
3. Check switches, relays, and switches of diodes, and circuits
4. Polarity test of cable and plug
5. Track and locate short circuits
6. Test the working voltage of the poor ground contact: 6-24V DC
Overload Protection: 7A (When the current exceeds 7A, this item will automatically disconnect the current.) )
Package List：
1 x
Electric Circuit Tester
Note:
1. When the power switch is pressed (or shaken), the battery current is conducted directly to the tip, and sparks may occur when it touches the ground or some places
2. This machine group is not used with 110/220Volt factory current, only for DC 6~24V system.
3. Do not use under AC voltage.
4. After you complete the vehicle inspection, all your disconnected connections are properly restored.
5. Always follow the instructions and procedures indicated in the vehicle workshop manual before attempting to disconnect any part or subsystem of the circuit.
6. For safety, never touch any dangerous parts of the vehicle with your hands. Do not touch any live conductors with your hands or skin.
7. Do not use if damaged.
8. Some parts of the vehicle work at low voltages, they cannot withstand the voltages associated with the project. To avoid damaging these parts, do not apply voltage directly or indirectly to the item.
9. Before driving, please make sure that the vehicle is safe and reliable.
10. Do not use this item while driving