The Vacuum Coolant Fill Kit is designed to improve work efficiency while reducing pollution risk. It's easy and safe to operate, and applicable to a variety of models. This kit can be used to improve the quality of antifreeze replacement.

Specifications:

Product name: coolant vacuum refill kit

Product material: Rubber + Brass + Steel alloy

Applicable type: Widely applicable Applicability: Applicable to a variety of models, whether it is cars, trucks or some engineering machinery

Making vacuum operating steps-

1. Clear the water in the water tank

2. Open the car hood and open the hook to the appropriate position

3. Connect the rubber joint to the oil tank

4. Make sure all on-offs are closed and connect the thin tube to the tail

5. Connect the intake pipe Press the yellow on-off button and turn on the intake on-off for vacuum. When the pressure reaches -20~-25Inhg (-50~-60cmhg), turn off on-off No. 3

6. The antifreeze hose will be connected to the car body and the other end will be inserted into the antifreeze container. The interface must be complete

Refill the antifreeze

6) Disconnect the air tube and vacuum pump

7) Connect the antifreeze hose to the quick connector

8) Put the hose into the container with mixed coolant and make sure there is enough antifreeze to re-inject the cooling system

9) Open the valve and the antifreeze will flow into the diffuser

When the pressure gauge reads zero, the refilling process is completed, make sure whether the antifreeze is refilled

10) Disconnect the air tube and hose, clean all the residual antifreeze in the equipment before storage

Packing List:

1 Set of coolant refill kit (7pcs)

Note:

Due to different lighting and screen settings, the item color may be slightly different from the picture.

Due to different manual measurements, please allow a 1-2cm difference in size.