Torquata Quick Screw Decking Jig is effortlessly set to accommodate boards 90 – 150mm by using the quick-release button and sliding mechanism, or by referencing off the rule guide, which locks in at 5mm increments. The 50 degree hardened screw guides situated on the front and rear enable the precise positioning of screws. Inbuilt 3.5mm spacers enable consistent gaps between decking, with additional spacers provided to increase to 4.5, 5.5 or 6.5mm. The clamp handle locks downward to secure the jig, and when it’s time to move onto the next board, it is easily released by pulling the clamp release lever upwards.