How to Use:

• 1. Hold the instrument, scan in an arc slowly, and rotate yourself together. At this time, the prospector's elbows should always be tightly attached to the sides of the body, and it is enough to rotate about 40 to 60 degrees. The prospector must rotate slowly and maintain a steady body
• 2. Standardize your scanning actions. First, let the receiving antenna be correctly extended after opening. Make the receiving antenna directly in front of you, open at 90 degrees to your body, and not deflect to the left and right.
• 3. When the antenna is aligned with the target, the instrument will confirm it, even if you cross the target and continue to explore. When you feel that this determination is effective, remember this direction. Then, move the instrument to the left or right about 10m, and repeat the process of determining the policy just mentioned. Observing the determined direction this time, the intersection of the two directions is the buried position of the target
• 4. If you feel that there is a certain deviation in the specific position that has just been measured, you can determine it from another point of view. If the target is within 10m, slowly and steadily follow a prescribed route. When you pass the target and you are directly above it, the antenna of the instrument will shake on both sides. The position measured at this time is very accurate. (Please refer to the manual for specific operation instructions). The product has its own degaussing function (as long as the receiver probe is close to the ferrous metal, alarm 3 times and can be degaussed)

Specification:

Note:

• Metals that can be scanned include gold, silver, copper, and gems with high metal content. It cannot detect other metals.
• Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.