Free Shipping – Store Wide
6 Pcs Solder Wick Solder No-Clean Braid Wick Set, 1.5 Meter Length Desoldering Braid Wick (2.0 Mm, 2.5 Mm, 3.0 Mm)
6 Pcs Solder Wick Solder No-Clean Braid Wick Set, 1.5 Meter Length Desoldering Braid Wick (2.0 Mm, 2.5 Mm, 3.0 Mm)
Brand: MisenFar
A$13.65
- 【Package Include】You will get 6 pieces of no-clean solder braided wicks, including 2 pcs 2.0mm, 2 pcs 2.5mm, 2pcs 3.0mm in width and 1.5 m long solder wick, enough quantity for your daily needs.
- 【Premium Material】The desoldering wicks are made of 100% quality copper wires with fine braid design. Using flat stitch weaving can improve the capillary effect and the redundant solder absorbing ability, increasing the work efficiency.
- 【Low Residue Design】The solder wicks with no-clean design to make sure that just little residues left behind and the residues are non-corrosive and non-conductive, you do not need to spending time removing them from the circuit boards.
- 【Applicable Occasions】The no-clean desoldering wicks are suitable for industry welding, labs work, school or home work. Not only improves work efficiency, but also does not damage the PCB board. Suitable for remove solder and correct errors on small PCB boards, bringing more convenience for your daily work
- 【Satisfaction Guaranteed】: Please don't hesitate to get in touch with us if you have any questions or concerns about the solder wicks. Our service team will respond quickly to your problems within 24 hours.
Product Description
Handy Tool - Solder Wick Solder Braid Wick
The desoldering wicks are practical tools to correct mistakes on small circuit boards and do not damage them, suitable for post-soldering and desoldering.
This desoldering braid wicks simplifies the desoldering of any type of component. The desoldering braid made of copper has a very high absorbency! Press the desoldering braid onto the desired spot and heat the solder with the help of your soldering iron. The braided desoldering wick absorbs the melted solder and is thus quickly and easily removed from the solder joint.
SPECIFICATIONS
| Brand: | MisenFar |
| Material: | Copper wire |
| Length: | 1.5m |
| Width: | 2.0mm/2.5mm/3.0mm |
| Package Includes: | 2 x Solder wicks, width 2.0 mm; 2 x Solder wicks, width 2.5 mm; 2 x Solder wicks, width 3.0 mm. |
Step 1
To remove the solder wire, place the appropriate length of suction wire on the solder joint to be cleaned, and then gently press the electric soldering iron tip to heat. After the solder has melted, it is sucked up by the suction wire.
Step 2
After sucking up the solder, please remove the soldering iron and solder wire at the same time. (Switch off the soldering iron normally, pay attention to electricity safety)
Step 3
Cut off the used solder wire with a cutter. (Please don't worry, our products are easy to cut due to the characteristics of copper wire material)
- Batteries Required?: No
- Power Source: hand_powered
- Country of origin: China
- Item Weight: 40 g
- Included Components: 2 Piece 1.5mx2.0mm Solder Wick Solder, 2 Piece 1.5mx2.5mm Solder Wick Solder, 2 Piece 1.5mx3.0mm Solder Wick Solder
- Package Dimensions: 13.4 x 9.8 x 2.5 cm; 40 Grams
- Manufacturer: MisenFar
A$13.65
Shipping to Australia
Delivery time varies by location
Return & Refund Policy
Check our return & refund policy
Security & Privacy
Safe payments: We do not share your personal details
Availability:
-
In Stock
Sign in
or create an eMega account
Shop smarter — get exclusive deals & order tracking