Spec:
Item Type: Driveway Alarm
Material: ABS
Uses: Homes, shopping malls, supermarkets, shops
Sensor Battery: 2 x AA batteries (without battery)
Receiver Battery: 1 x 9V laminated battery (without battery)
Transmitting Distance: Approx. 100m/ 109.36yd (in an open, unobstructed, and undisturbed environment)
Infrared Sensing Distance: Approx.3-7m/ 3.28-7.66yd
Music Ringtones: Classic singles (For Elise)
How to Use:
1. Gently pry up the front cover of the sensor, install a 9V laminated battery, and turn on the switch on its internal circuit board.2. Slide the battery back cover on the back of the receiver and install two AA batteries.3. Push up the power switch on the side of the receiver to turn on the receiver switch.4. Install the sensor on the side of the gate entrance or where you need to detect the human body passing by.5. Adjust the volume of the receiver, turn the power switch of the receiver to the middle position for low volume, and the uppermost position for high volume.6. Adjust the angle of the sensor to a suitable position. When the guest enters its detection range, the receiver automatically emits a sweet music ringtone and the red LED light is on.7. Each time the sensor is turned on, the wireless doorbell welcome device needs to perform a self‑check function, about 10 seconds, and then enter the normal working state.
PackageList:
1 x Infrared Transmitter
1 x Doorbell Receiver
1 x Manual
2 x Bracket Accessory