AF Process

ABS Anti-Collision Housing

The Outer Frame Is Abs Anti-Collision Shell, Effectively Protect The Lens

360° Press Adjustment

Compared With The Traditional Rotary Adjustment Is More Free Broader Field Of Vision, Convex To Remove The Blind Spot Small Round Mirror, To Ensure That The Effective Expansion Of Your Field Of Vision Can Be Adjusted Angle

3M Adhesive Backing

Installation Notes:

1. Before Installation, Use A Towel To Clean Up The Rearview Mirror, And Then Select A Suitable Location To Install It At One Time

2. If The Temperature Is Too Low In Winter, You Can Use A Hair Dryer To Heat The Adhesive Backing Properly To Increase The Adhesion

3. If You Need To Change The Mounting Position After Mounting, Heat The Adhesive Backing With The Help Of A Hair Dryer First, And Then Remove The Mirror With Force

After Installation, If You Need To Change The Installation Position, Heat The Adhesive Backing With The Help Of Hair Dryer First, Then Remove The Mirror With Force

4.Do Not Get Wet Or Wash The Car Within 24 Hours After The Installation Is Completed

Recommended Mounting Location

1. In Order To Expand The Field Of Vision To Prevent Blind Spots, It Is Recommended To Install It On The Outside Of The Rear-View Mirror, As Shown In The Following Figure A

2. For Reversing To See The Blind Spot Of The Rear Wheels, It Is Recommended To Install The Inside Of The Rear-View Mirror Near The Lower Corner Of The Body, As Shown In The Following Figure B