433.92 Mhz Garage Remote Door Opener, 2Pcs Remote for Gate Garage Door Car Skylight

Before purchasing, please make sure that the following conditions are met：

1. The original remote control is working properly.
2. The frequency should be 433.92Mhz.
3. The chip CODE (encoder chip) is in the support list.

Check Your Remote’s IC Code First! – Ensure compatibility before purchase (unsupported ICs won’t work).

Exclusions: Does NOT copy rolling code (e.g., HCS200/300/301, Merlin, ATA, ECO brands, etc.) or two-way remotes.

Supported IC CODE: 2260 (ex, PT2260, SC2260, HS2260 LX2260, HX2260, etc); 2262 (ex, PT2262, SC2262, LX2262, HS2262, HX2262, etc), PT2264, PT2242, PT2240 (LX2240 LX2241 SCL2240), CS5211, 1527 (EV1527, HS1527, HX1527 SC1527 GP1527 CP1527 AD1527 SCL1527 TL1527 ZX1527), SMC918, AX5026, SMC926, AX5326-3, AX5326-4, SC5262, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630. The Codes that have the same suffix like SC2262 and PT2262 are also supported.

NOT Compatible With:

Rolling Code Remotes and Two-Way Remotes (e.g., HCS200, HCS201, HCS300, HCS301, ICs start with HCS etc. Merlin, Merlin+, ATA, ECO Brands, etc.).

This Cloner Only Works with Fixed/Learning Code Remotes – Rolling codes cannot be copied.

Matching steps:

1. First, perform the code clearing action, and press and hold the A&B button on the remote control at the same time until the LED indicator on the remote control flashes quickly, and the code clearing is successful;

2. Start to clone the original remote control code matching action: press and hold the buttons at the same position of the original remote control and the remote control at the same time and do not release it. When the cloned remote control LED indicator flashes three times and then flashes quickly, it means the cloning is successful. (When cloning the code, the original remote control and the remote control must be in close proximity);

3. Check if the first button of the clone is successfully cloned: Press the cloned button and without releasing it, if the LED indicator is always on, it means that the clone has been successful. If the LED indicator is off, it means the cloning is unsuccessful, and you need to re-clone step 2 again;

4. Follow the actions in step 2 to clone other keys in sequence.