Technical data:
Item Type:Nail Decoration Tools
Material: ABS
Colour: white.
Optional plug: UK, Australia, EU, USA
Power: 100W
Voltage: 220-240 / 100-110 V.
Frequency: 50/60 Hz.
Temperature: 150 °C.
Size: approx. 23 x 16 x 15 cm / 9.1 x 6.3 x 5.9 inches.
Package weight: approx. 647g Function: Suitable for metal nail tools
Instructions for use:
1. Place the box on the flat desk. For the 2nd Open the lid and place the quartz sand on the liner. (The amount of quartz sand must not exceed 80% of the coating capacity.)
3. Turn on the power switch and the heating indicator lights up when the machine gets warm. For the 4th After heating for 10 to 12 minutes, the tools to be disinfected should be inserted vertically into the glass ball. (Plastic and liquid tools cannot be used).
5. It takes only 20 to 30 seconds to complete the tool. Then wear gloves to remove the tool. For the 6th When the temperature of the coating of the machine reaches 200 °C, the heat indicator automatically goes out and the machine stops heating. When the temperature of the coating of the machine drops, the heat indicator automatically lights up and the machine heats up automatically. To the package list:
1 x nail decoration tool.
1 x quartz sandbag.
Please note:
1. After use, immediately unplug the plug from the socket and turn off the power supply. For the 2nd It must not be used or stored in the bathroom or other damp place. For the 3rd When the machine is connected to the power supply, the user should pay attention to keep children away from the machine. For the 4th Do not expose the machine to water or other liquids. When it was in the water, it should turn off