Satin from Fila Surface Care Solutions protective wax with satin effect. Ideal for terracotta, clinker brick, stone/non-glossy agglomerates and cement tiles. Format and range 1 litre canister. - 30-40 m² with a litre of satin on stone. - 30 m² with a litre of satin on cotto. The range is indicative and also depends on the application material. The range is intended for a single job. Advantages: self-polishing, can be polished to increase or restore the shine. - Three modes of action in one product: protects, nourishes and gives the surfaces an excellent finish. - Satin effect - Easy to apply and with excellent yield. - Also does not create a layer of maintenance care. Dilution: either pure or diluted as needed. Application 1. When the floor is clean and dry, apply an even layer of satin with a fleece or other applicator. 2. After an hour, apply a second coat crosswise to the first. 3. After about half an hour, the ground can be driven on. For a higher shine, treat with a polishing machine or wool cloth. For care: shine renewal (every 2-3 months). 1. Clean the surface with a diluted solution of Cleaner Pro (1:200). 2. Apply satin by diluting 500 ml of the product in 5 litres of water. 3. If a higher shine is desired, polish the surface after drying (about an hour) with a polishing machine or a wool cloth. To restore the finish (once a year): 1. Apply the pure wax with a cloth, fleece or other applicator. 2. When the surface is dry (approx. 1 hour), polish it. Warning: use of the product on outdoor surfaces, in damp environments or in case of stagnant water is not recommended. - Check the possible optical change on a small part of the surface before application.