WAGO 221-2411 4mm² INLINE Splicing Connectors for All Conductor Types
2-wire 4mm² connectors - 221-2411 x 60
- Pull the lever up, insert a conductor and push the lever back down
- Easily terminate conductors from 0.14 to 4mm²
- Connect solid, stranded and fine-stranded conductors
- Time savings for installers and device manufacturers
- Quickly install devices with higher levels of power consumption
- Safely install long cable runs with larger conductor cross-sections
- The new mounting carriers are available for all 221 Series Splicing Connectors (2, 3 and 5 connectors) and can be installed either vertically or horizontally
- Conductors can be conveniently connected and removed before or after inserting a connector into the carrier
- Voltage up to 450V
- Current up to 32A for 4mm²
- Suitable for all Cu termination (including earth)
- Continuous service temp. 105°C
- Ambient operating temp. 85°C
- Adhres to AS/NZS 3000 under Clause 1.7.3 Note 2
For more information visit: https://www.wago.com/au/installation-terminal-blocks-and-connectors/inline-splicing-connector-with-lever/p/221-2411