How To Change Ringtone And Pair The Door Chimes

Here's how to pair them:

1. Plug one receiver into a regular socket, and pick the sound you want on this receiver
2. Press and hold the volume button on this receiver for 5 seconds or so, then the receiver will blink with a "ding" sound. And then push the transmitter button at the same time (within 5 seconds) to pair with the receiver. Finally, you will hear the music you set
3. The same way to pair other transmitter buttons with receivers

If the doorbell rings randomly, the frequency must be being interfere by other doorbell from the same supplier.

You just need to clear the code of the receiver, and pair it with transmitter again for a new code. follow the steps:

(1). Press and hold the Forward Button of receiver for 5 seconds or so till it blink with "ding' sound to clear the code.

(2). Pair them to the transmitters that need to control the receivers one by one again to get a new code.

See Here's how to pair them step (1)-(3).

.

Pairing the devices and selecting doorbell sound is easier if done before installing the transmitter buttons.

Installation Methods

Package Included

• Double-sided Adhesive Tape * 1
• Screw driver * 1
• Screw kit & Anchors * 2
• User Manual * 1
• AU Plug-in Receiver * 1
• Transmitter (Battery included) * 1