FastCap 2P-10 RT Thick Glue is ideal for woodworkers, carpenters and DIYers for filling large gaps, trim carpentry and will not run. The non clogging pin cap will set in 10 seconds and will cure in up to 30 seconds. The 10 oz adhesive bottle is rubber toughened and can be stored in a tool box. This adhesive glue can get into tight spots to create a virtually unbreakable bond between both sides. It can also be sanded so it is flush with the surface of the material, which makes it perfect for professionals. This is yet another innovative member of the FastCap 2P10 family. 2P-10 is a two part ten second adhesive. Just apply the adhesive, then spray the activator and stick it together for a strong, permanent bond. However this is more than just a 2 part adhesive. FastCap have gone a step further to design a full range of adhesives, applicators and colourants to meet all your rapid adhesive needs. So much more than other CA glues that think they're super. 2P-10 can be used on any material as long as it is clean and the surface is well prepared. The surface should be clean with no oil and slightly etched so the glue can bite more effectively. It should not be used in lieu of a weld (on metal), but it is very effective for tacking, to hold a piece in place. Available in 63 ml size.