Wireless Pool Thermometer

Transmission Frequency: 433Mhz

Transmission Distance: up to 300 ft in open space, if there is interference, the transmission distance will be limited.

Receiver:

Temperature Measurement Range: -10℃~60℃(14℉~140℉)

Humidity Measurement Range: 0~99％

Wireless pool Thermometer:

Temperature Measurement Range: -40℃~70℃(-40℉~158℉)

Temperature Sampling Period: 10 seconds

Waterproof Level: IPX7

Package Content:

• 1 x Wireless Pool Thermometer

● MAX/MIN/CLEAR:

• Quickly press: press to display the maximum minimum temperature. When there is no button operation, the current temperature display will be restored after the 30s.
• Long press(5s): long press to clear the maximum minimum temperature record value, then re-record.

●TX

• Quickly press: send temperature data to the Temperature and humidity monitor, when the transmission is successful, the red light of the wireless remote sensor will flash once.
• Long press(5s): reset the synchronization between the Wireless remote sensor and the Temperature and humidity monitor. The sensor displays CH8, indicating that the reset is successful.
• After resetting, the wireless remote sensor needs to be powered on again (Can be synchronized within 2 minutes after the wireless remote sensor is re-powered)
• When synchronizing try to make the Wireless remote sensor close to the Temperature and humidity monitor and please do not press any button.

●Flexible

• add an Inkbird M1 WiFi Gateway (sold separately) to pair with Pool Thermometer for data and alerts via the Internet.

TX: Press the button to send temperature data to the receiver manually, the blue light of the pool thermometer will flash once when the transmission is successful. Hold the button for 5 seconds to reset the pool thermometer and disable the synchronization, reinstall the batteries of the pool thermometer, it will synchronize with the receiver automatically within 2 minutes.

Note: Please put the pool thermometer as close as to the receiver during synchronization.