The smoke leak detector is specially designed for the leak detection of automobile air intake system, fuel system, cooling system and other pipelines. It is suitable for all family cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats.

Specifications:

Voltage: DC12V

Output pressure: 23 Psi

Output traffic: 10-20L/min

Power supply: 12V car battery

Test oil capacaty: 100ml

Size: 12 x 13 x 20 cm

Host net weight: 3kg

Operation Method:

1. After assembling the leak detector accessories, inject about 40ML smoke oil for the first use, and it can work continuously for about 15 minutes after one filling; excessive filling will lead to insufficient internal heating and no smoke or less smoke output.
2. Open the engine cover, remove the air filter, some models need to remove the air flow sensor.
3. Put the air intake adapter on the engine air intake hose port to block the pipe, and press firmly until the air intake hose is sealed.
4. Connect the power cord to the car battery. The red alligator clip is connected to the positive pole of the battery, and the black alligator clip is connected to the negative pole of the battery.
5. Turn on the power switch, and the power indicator light is on, indicating that the power supply of the smoke leak detector is normal.
6. According to different models, the inside of the engine will be full of smoke in about 1 minute, and start to check the leakage fault point of the instrument.
7. After the inspection is over, remove the power cord and put away the accessories for the next use. The main body of the air inlet adapter is made of rubber, please avoid contact with corrosive liquids such as gasoline.