Ensure that 2 x AAA batteries are properly installed in the battery compartment. (Please note, batteries are not provided.)

Grasp the handle and gently release the blade lock.

Press the laser light button to activate the Laser Positioning System, helping you align your cut accurately.

Lower the safety shield to securely hold the paper in place during cutting.

How To Correct Laser Light Alignment

1. Retrieve the Allen Key stored on the underside of the paper guillotine.
2. Confirm that 2 x AAA batteries are correctly installed in the battery compartment. (Batteries are not included.)
3. Activate the laser light by pressing its button.
4. Find the two access holes located on the top of the guillotine, on the side where the handle is.
5. Observe the two holes: the upper hole (A) adjusts the laser light's angle, while the lower hole (B) shifts the laser light left or right.
6. Insert the Allen Key into these holes and gently turn it, watching the laser light's alignment shift. Aim to align the laser light with the base's edge where the paper will be cut.
7. After aligning the laser light accurately, return the Allen Key to its storage spot underneath the device. Your guillotine is now ready for use.

Please be aware that the thickness of the laser light shown in the images is solely for demonstration and will not appear as thick on the actual device.