Specifications :
Type: High Pressure Foam Gun
Material: ABS Propylene, Copper
Water Pressure: 2.5-4 Bars
Dilution Ratio: 6 Kinds of Dilution Ratio
Bottle Capacity: 900ml
Range: 8M
Flow: 5.5L/min
Bottle Size: 10.5*10.8*17cm
Install Size: 44*10.8*22.5cm
Net Weight: 0.6kg / 21.2oz
Usage Method :
1.Please read the instruction manual carefully and assemble the foam gun properly.
2.Infuse right amount of washing fluid.(Capacity: 900ml.)
3.Please assemble the hose kit to the water pipe of the tap and foam gun rightly.
4.To layout diagram and adjust the rotary knob according to the ratio.
5.Open the water faucet of the tap.
6.Hold the controlling pole of foam gun with nozzle aiming at the object and spray foam.
7.Lay it for a proper time and the offload gun and wash it.
8.Remove the dirty water with rubber cleaner and then wipe it with clean rag or scrap cotton yarn.
9.You must hold the controlling pole of gun closely and control the moisture after close the tap water faucet.
Attentions :
1. Joint with the tap water faucet. Please confirm the connections tight carefully to avoid any leak.
2. Please carefully confirm the connections are tight to avoid leaking.
3. Please discharge the hose kit from the water faucet and foam gun when you don't use it.
4. Never mix many kinds of detergents together.
5. Please don't use it on human being.
6. It is better to wear rubber gloves and protective glasses.
What's included :
1x NUZAMAS Foaming stick
1x NUZAMAS Mixing head
1x NUZAMAS Quick connector
1x NUZAMAS Hand grip
1x NUZAMAS Bottle
1x NUZAMAS sponge
1x NUZAMAS User manual