READY TO USE: Water-based maintenance coating for Hard Surface Floors. Revives scratched & dull surfaces. STEP 1: DUST - Remove dust from the floor using a super electrostatic Bona Microfiber Dusting Cloth, or by gently vacuuming + Clean the floor using Bona Floor Cleaner. Note: The floor should be completely dry and clean before application as dirt left on the floor will become trapped. STEP 2: SHAKE - Shake the bottle gently for 30 seconds and allow it to stand for a few minutes before use. STEP 3: APPLY - Thoroughly wet the Bona Applicator Pad with the product and apply a wavy line of product on the floor. Work in manageable sections (2-3 metres). STEP 4: SMOOTH - Even out the applied product by drawing the applicator pad smoothly across the floor. Using Polish on hard surface floors apply in a single direction. Continue the process until the entire floor has been coated. Ensure an even appearance and sheen by observing the coverage rate. STEP 5: DRYING - Allow at least 2 hours to dry before walking on the floor. Avoid heavy traffic and replacing furniture; For Polish 12hrs. EXTRA NOTE: If the floor has previously been maintained with polish or wax this may affect the adhesion of Bona products. If in doubt, do a trial application on a test area.