Mcgard 24548 Black Cone Seat Wheel Locks(1/2"-20 Thread Size) - Set of 5
Mcgard 24548 Black Cone Seat Wheel Locks(1/2"-20 Thread Size) - Set of 5
- Seat Style Cone Seat Nut; Thread Size 1/2-20; Overall Length 1.46; 3/4" & 13/16" Dual Hex Size; Includes 5 Locks & 1 Key.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.
- For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
- Please note that wheel lock sets are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
- Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
From the manufacturer
A Different Lock for Every Wheel
McGard offers multiple wheel lock options that vary in thread size, thread length and color. One important factor that often goes overlooked is the mounting surface type. Some wheels required a cone seat, some require a radius seat and others may require a shank style wheel lock. It is important to match the seat type of the wheel lock with the seat type of the wheel for proper installation.
See comparison chart below to help determine the best wheel lock type for your vehicle and wheel combination.
Step 1
Remove wheel covers (if equipped) and one lug nut/bolt from each wheel. If studs are rusty, clean with a wire brush prior to installing wheel locks. Do not lubricate threads. Note: Wheel locks should always be the last nut/bolt tightened on each wheel and should be the first one loosened.
Step 2
By hand, install one McGard Wheel Lock onto each wheel to replace the lug nut/bolt removed in step 1. Use only one lock per wheel. Note: If original lug nuts/bolts use a washer/plastic cap, be sure to install the washer/plastic cap included in package onto the wheel locks. Notice: Air impact guns should not be used for installation of locks or lug nuts/bolts. Use of an impact gun for installation may cause over tightening resulting in difficulty of removal and permanent damage to the lock and key. Overtightening can also cause damage to brake rotors and wheel seats.
Step 3
Using the McGard key and a lug wrench, tighten each lock to the torque specified in your vehicle owner’s manual. Be sure to keep the key pattern squarely engaged into the lock pattern via direct inward pressure. For best results, use a torque wrench and socket for final tightening. Wheel locks should be re-torqued after 25 miles(40Km) of driving. Newly installed lug nuts/bolts should also be re-torqued.
- Item Model Number: 24548
- OEM Part Number: 24548
- Brand: McGard
- Model: 24548
- Manufacturer Part Number: 24548
- Item Weight: 454 g
- Exterior: Machined
- Special Features: Computer generated key designs allow for an infinite number of key patterns
- Is discontinued by manufacturer: No
- Product dimensions: 19.05 x 19.05 x 19.05 cm; 453.59 Grams
- Manufacturer: McGard
-
In Stock