Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.