Product Name: Modified Carburetor Bucket Throttle Line
Line Length: 190cm/74.8""
Material: Rubber, Steel, Iron
Features:
- Universal motorcycle carburetor bucket throttle cable wire modified fit for HONDA Yamaha Keihin.
- The main materials of the product are rubber, steel and iron, and there are three colors available: red, yellow and green.
- Built-in protective PVC stop small dirt particles.
- Good performance, can better control the throttle open and close.
- When the throttle line is deformed or lengthened, it can be replaced with this product if it cannot be adjusted or has no change after adjustment.
- If the gap of the motorcycle throttle line is too large, the adjustable screw at the outer interface of the throttle line can be adjusted (screwed outward) to reduce the active gap of the throttle line. After adjustment, make sure that the refueling handle has free clearance. Place of Application:
- Modification of throttle line of off-road motorcycle.
Note:
- Don't tighten the accelerator cable too much. If it is too tight, it will increase the idle speed of the car. If it is serious, it will make the car run out without fuel.
Package Include:
1 x Motorcycle Throttle Cable