DESCRIPTION:

You can now turn your M.2 NGFF SSD drive into a 2.5-inch SATA III or External USB 3.0 Enclosure with the Sabrent EC-M2CU. Exclusively designed for M.2 NGFF SSD B or B+M Key supporting 2242 (42mm), 2260 (60mm), and 2280 (80mm) size drives. Slim Aluminum casing, Plug and Play no driver install required.

• Note: It doesn't support M.2 PCIe NVMe or M.2 PCIe AHCI, Pls check your M.2 SSD type before place order.
• Compatible with M.2 NGFF SSD and SATA-enable host devices such as Desktop & Laptop computer systems and Hot Swap 2.5'' SATA Bays.
• Convert an m.2 NGFF solid-state drive into a USB 3.0 or a Standard 2.5in SATA III 6Gbps SSD.
• This is backwards compatible with USB 2.0 and 1.1 with their transfer speeds.
• Exclusively designed for M.2 NGFF SATA SSD B or B+M Key.
• Added protection for your SSD with enclosed housing.

• Support M.2 from factor: 22x42, 22x60, 22x80.
• System performance maximization.
• Plug and play no drivers required.
• Standard SATA 22pin connector.
• B & B+M Key compatible.

Setup instructions:

1. Pull on the plastic piece to open the enclosure.

2. Connect your M.2 SSD B or B+M Key drive into the board.

3. Screw the drive-in.

4. Close the case. 5. Screw in the sides.

6. Connect the USB 3.0 cable to the enclosure and to your computer.

Package Contents: