1. The band roll consists of PTFE as the main material and can support a high temperature of 300 ° C.

2. The total length of the band roll is 10 meters, which is cut to the required and lasting length.

3. The tape has better anti -aging and insulation properties, and the material is soft and does not produce any wrinkles.

4. The tape is not easy to adhere to a substance, and it is easy to clean all kinds of oil spots, spots or other accessories outside.

5. It is mainly used for sealing processes such as sealing machines, several high temperature rolle coatings, slide and aviation shapes.

Technical data:

Element type: PTFE tape

Material: PTFE

Technical data:

Thickness: approx. 0.13 mm / 0.01 inches; Width: approx. 13 mm / 0.51 inches; Length: approx. 10m / 32.8 feet

Thickness: approx. 0.13 mm / 0.01 inches; Width: approx. 19 mm / 0.7 inches; Length: approx. 10m / 32.8 feet

Thickness: approx. 0.13 mm / 0.01 inches; Width: approx. 25 mm / 1in; Length: approx. 10m / 32.8 feet

Thickness: approx. 0.13 mm / 0.01 inches; Width: approx. 50 mm / 2in; Length: approx. 10m / 32.8 feet

Description: PTFE Band Roll with glue. It is suitable for almost all vacuum sealing machines and most types of hand/impulse heating machines to replace the deteriorated or burned adaptive tape, which is an important barrier between the heating element and the bag. The old adhesive tape causes a deficient seal of the bag and can damage the heating element and damage the seal. Simply take off the tape tape of the roll and place it in the correct area (you must clean the embroidery position before placing the new tape). On the cable of the vacuum sealing machine under the pulse sealing machine cable

Packfelist:

1 x PTFE adhesive tape