What is Super Tough PLA Material?

• Super Tough PLA (PLA-ST) is a kind of 3D printing material made of PLA as the main raw material and adding modifiers and other additives. Suitable for printing mechanical parts with higher requirements for strength and precision, as well as some structural parts and functional parts.

Specification of Super Tough PLA:

• Material: PLA (Polylactic Acid)
• Diameter: 1.75mm
• Weight: 1KG
• 3 Available Colors: White, Black, Grey

Recommended Printing Parameters:

• Printing Temperature: 200-230℃ (Recommended Temperature 215℃)
• Bed Temperature: 45-60°C
• Fan Speed: 100%
• Printing Speed: 40-100mm/s
• Recommended Heated Build Platform: Textured Paper, PVP Solid Glue, PEI

Printing Advice: Super Tough PLA has low rigidity, so travel movements need to reduce the printing speed (≤40mm/s) to prevent bad feeding.

Vacuumed Sealed Packaging:

• Antioxidants + Vacuum Packaging + Product Manual
• eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.

How to Storage:

• 1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
• 2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
• 3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.

Please Notice:

• The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.