Blagdon Minipond pumps are high quality pond pumps manufactured with advanced technology, designed specifically to run fountains, filters and waterfalls. The powerful motors are easy to maintain, having a single moving part impeller system, featuring highly wear-resistant ceramic shaft and bearing design. The caged design prevents clogging, whilst the optional pre-filter foam can be used with a daisy jet that reduces blocking.
The Minipond 2000 is compact, economical and easy to install.
This 48 Watt, 230 Volt (50 Hertz) pump has a maximum flow rate of 2000 litres per hour (440 gallons per hour) and a maximum pumping height of 2.2 metres (7'2").
The Minipond 2000 comes with a comprehensive range of fittings, including 2 interchangeable hose adaptors, 4 fountain display heads and a flow control valve.
Blagdon Minipond pumps are available in 4 sizes.
No plug is included with this product, as in the UK it is illegal for manufacturers to supply an indoor use 3-pin plug with a fixed outdoor product for safety reasons. Please see Blagdon Powersafe Switch Boxes or Outdoor Connectors for safe and easy-to-use outdoor power solutions.
This Minipond pump should be located on a firm and level base in the pond or water feature
at a depth of at least 10cm, but no more than 2 m.
It is advisable to keep the pump off the bottom of the pond to avoid silt entering the pump
causing excessive wear and increasing pre-filter cleaning.
Can be used as a fountain or to pump water through a water feature.
Full installation and maintenance instructions are given in a detailed user manual provided with the product.
Over half a century of fish keeping and water gardening knowledge are brought together in the product so you can be assured of a successful, creative water garden.