Features:
1. The valve body of the spin-down sediment water filter is made of corrosion-resistant brass and the cup body is an explosion-proof transparent filter shell made of aviation polymer material, with a maximum burst pressure of up to 120 kg.
2. The filter is made of food-grade 316L stainless steel, the filtration accuracy is 40μm, can effectively filter out particles and impurities from tap water.
3. The cup body of the flushable pre-filter filtration is transparent. So it is convenient to observe the dirt in the bottle in real time to judge whether it needs to be cleaned.
How to install:
The reusable rinseable fine filter should be installed perpendicular to the pipeline, with the drain ball valve facing down. The arrow direction on the valve body indicates the direction of the water flow. The drain ball valve is closed after installation.
Wastewater drainage: if a certain amount of dirt has settled at the bottom of the front filter cup, the waste water should be drained in time. Place a container, e.g. a plastic bucket, on the lower end of the drain ball valve. Or connect the plastic hose to the ball valve interface and guide the plastic pipe to the waste water drainage. Open the drain ball valve to drain the wastewater, and the drain time is greater than 30 seconds.
Specification:
Water flow: 3 T/H.
Filtration accuracy: 40μm.
Pressure range: 1.5-16 kpa.
Ambient temperature: 2-70°C.
Water temperature: 5-45°C.
Package list:
Filter, sewer pipe, wrench, joint, teflon tape, mounting clamp