Swivelling installation IR motion sensor The infrared sensor detects movements of people, large animals and vehicles in a detection range of up to 3 to 8 m at a detection angle of 360° (on an open area) and turns on the connected lighting. After an adjustable time of approx. 10 seconds to 15 minutes, the motion sensor switches off again. With the help of a controller, the switch-on sensitivity of this device can be adjusted depending on the ambient brightness (in the range between 3 and 2,000 LUX). In addition, the detection space can be set targeted by the swivelling of +/-20°. Product features: operating voltage: 220-240 V AC 50/60 Hz. Installation: 3-wire max. Power consumption: max. 1200 W with incandescent bulbs max. 600 W for LED lamps and energy-saving bulbs. Consumption at standby: 0.5 W. Detection speed: 0.6 - 1.5 m/s. Detection range: max. 3-8 m (<24°C)/360° ambient brightness: 3-2,000 lux. Protection class: IP20. Switching delay: min. 10s +/-3s - max. 15min +/-2min ambient temperature: -20° to +40°C humidity: <93% swivel: +/-20° dimensions: diameter 85 x 60 mm installation hole: 65-75 mm housing material: aluminium mounting and operating instructions as PDF Box contents: 1 x Sebson built-in IR motion detector With this infrared motion detector, LED lamps and lights can be moved over movement. 4. The detection range is 3 to 8 m with a detection angle of 360°. The switch-off delay is 10 seconds to 15 minutes. The infrared sensor can also be controlled based on the ambient brightness (3 to 2,000 LUX). This model is suitable for flush-mounted ceiling mounting. Item ID 3634 condition new age rating without age restriction manufacturer SEBSON country of manufacture China content 1 piece weight 110 g net weight 110 g