Flush-mounted IR motion detector
This motion sensor with IR sensor detects movements of people and large animals in a detection range of 8 m at a detection angle of 360° and turns on the lighting.
Programmable
At any time, duty cycle and switch-on sensitivity can be programmed. The controls are located behind a cap directly next to the sensor, so that the circuit can be adjusted even after installation.
Duty cycle: the light duration can vary from approx. 10 seconds. Up to 15 minutes. can be adjusted.
Ambient brightness: With the help of a controller, the switch-on sensitivity of this device can be adjusted depending on the ambient brightness (between 3 and 2,000 LUX).
What is the range of the sensor?
The range is up to 8 m with a detection angle of 360° and a mounting height of 1.8-4 m.
Where can I use the motion detector?
Suitable for flush-mounted cavity ceilings with a mounting hole diameter of 63-68 mm indoors.
Advantages:
Programmable (ambient brightness, duty cycle).
LED suitable up to 600 W.
Range: 8 m.
Detection angle: 360°.
Product features:
Operating voltage: 220-240V AC 50Hz.
Installation: 3-wire
Switch Type: Relay
Max. Power consumption: max. 1,200 W for incandescent lamps, max. 600 W for energy-saving bulbs.
Power consumption at standby: 0.5 W.
Detection speed: 0.6 - 1.5 m/s.
Detection range: 8 m (<24°C)/360°.
Ambient brightness: 3-2,000LUX
Protection class: IP20.
Switch-off delay: min. 10s +/-3s - max. 15 min +/-2 min.
Ambient temperature: -20 °C to +40 °C.
Humidity: <93%.
Dimensions: diameter 75 x 44 mm.
Installation hole: diameter 63-68 mm.
Case material: plastic.
Colour: anthracite.
Package includes:
1 x SEBSON IR motion sensor