Swivelling IR motion sensor for outdoor use The infrared sensor of this motion sensor detects movements of people, large animals and vehicles in a detection range of up to 12 m at a detection angle of 180° (on an open area) and turns on the connected lighting. After a preset time of approx. 10 seconds to 15 minutes, the motion sensor switches off again when no movements are detected. With the help of a controller, the switch-on sensitivity of this device can be adjusted depending on the ambient brightness (in the range between 3 and 2,000 LUX). In addition, the detection space can be set targeted by the swivelling in vertical and horizontal directions. Product features: operating voltage: 220-240 V AC 50/60 Hz. Installation: 3-wire max. Power consumption: max. 800 W for bulbs, max. 400 W for LED lamps and energy-saving bulbs. Consumption at standby: 0.5 W. Detection speed: 0.6 - 1.5 m/s. Detection range: max. 12 m (<24 °C)/180° ambient brightness: 3-2,000 lux. Protection class: IP44. Switching delay: min. 10s +/-3s - Max. 15min +/-2min ambient temperature: -20° to +40°C humidity: <93% swivel: 40° vertical, 100° horizontal. Dimensions: 79x55.5x67.5 mm. Housing material: plastic. Mounting and operating instructions as PDF Box contents: 1 x Sebson IR motion detector IP44. movements. The detection range is up to 12 m with a detection angle of 180°. The switch-off delay is 10 seconds to 15 minutes. The infrared sensor can also be controlled based on the ambient brightness (3 to 2,000 LUX). This model is suitable for outdoor use. The protection class is IP44. The sensor can be swivelled vertically and horizontally. Item ID 3631 condition new age rating without age restriction manufacturer SEBSON country of manufacture China content 1 piece weight 100 g net weight 100 g