Do you want to install a new sink tap?
Your stainless steel sink is under 5 mm thick?
Then you need this plastic sink reinforcement to secure the tap securely.
Sink reinforcement, 1 piece, in white, made of ABS, standard size with diameter 36.5 mm inner bore, tap stabiliser for thin-walled stainless steel sinks, sink fitting stabiliser against swinging
With the help of the fitting stabilising plate, the sink tap no longer wobbles and sits firmly and securely on the stainless steel sink.
With conventional stainless steel sinks, the sheet metal is relatively thin and heavy taps can bend or scratch the stainless steel sheet.
The tap stabiliser is attached between tap mounting screws and sink and stabilises the tap from below.
If necessary, the fixture for fittings can also be screwed on.
Size details of this plastic sink reinforcement:
- External dimensions: 90 x 70 mm.
- Inner diameter: 36.5 mm (inner hole).
- Total height: 17 mm.
Your advantages at a glance:
- Stabiliser for fittings made of ABS plastic - break-proof material
- Washer for sink tap with standard dimensions - suitable for standard sinks and taps
- Washer for stainless steel sinks with extra two screw holes - in addition, the stabilising plate for fittings can also be screwed on.
Box contents:
- 1 x sink stabiliser, in white, made of ABS hard plastic, standard diameter 36.5 mm inner bore, for most sink outlets and fittings, please note the size dimensions