AquaForte DM-22000 Vario S Pond Pump

With the AquaForte DM-22000 VarioS you have a variable pond pump with large capacity. Since you can regulate the flow with a controller as desired, you have even more possibilities with this pond pump. The pump can also bridge a height of max. 7.5 metres. An ideal pond pump to supply a pond filter, stream or waterfall.

Performance with controller settings

Practical about this pond pump is the external controller that allows you to adjust the power. In this way, you can adjust the flow between 30% and 100%. The controller that you attach to a dry place makes it very easy to use. You can adjust the power higher or lower with two buttons. Do you want to feed your fish or check the filter? Then simply put the pond pump into pause mode with the controller.

Insight into consumption.

By controlling the power, you can save on electricity costs. You choose exactly the flow you need. You can easily read the consumption on the display of the controller. The consumption for this pond pump is approx. between 70 and 200 watts.

Can be placed wet and dry

With this pond pump, you can freely choose the installation that best suits your pond. This pump is suitable for placing in the pond as well as outside the pond. The pump is not self-priming, so it is important to always place it under the water surface. The external controller is only splash-proof and must always be mounted in a dry place.

This pond pump is protected against burning during dry running. If the pump does not suck water for 2 minutes, it will turn off. After 30 seconds, the pump tries to start again. If water is not yet available, the pond pump turns off. This prevents the engine from overheating. You can then restore the process by unplugging the plug from the socket and plugging it back in. This pump has a synchronous motor and is equipped with a low-wear ceramic shaft