Installation without drilling
Step.1：
Clean the wall first, and make sure the wall is smooth.
Step.2：
Apply glue to the back of product in the shape of strip. (The distance between each strip is about 3 cm)
Step.3：
Press the product firmly against the wall with both hands and attach the sticker.
Step.4：
After waiting for 24 - 48 hours (2 days), tear off the sticker.
Installation with drilling [Recommend to use a 5mm drill bit]
Step.1：
Determine the installation position and height, measure the pitch and record the position.
Step.2：
Drill two placement holes in the wall with an electric drill.
Step.3：
Put in the hollow wall-anchors one by one.
Step.4：
Place the base on the wall, put the screws in the anchors and fasten with tools.