1) Clean the original window frame and let it dry.

Tear off the adhesive film of the magnetic strip and stick it flat around the window frame.

Cut off the excessive magnetic strip.

2) Attach the remaining magnetic strip to the magnetic strip glued around the window frame.

(If the magnetic strip does not fit perfectly, You need to change the direction of the outer magnetic strip.)

3) Tear off the adhesive film of the outer magnetic strip. Stick the mesh on the adhesive tape around the magnetic

strip evenly.

Insert the plastic strip into the corner

4) Tear off the adhesive film of the plastic strip, Align and stick on the magnetic strip

to clamp the mesh. Insert the corner when glued to the corner, and insert the

other side of the plastic strip at the same.

(Note that the magnetic strip should be pressed into the corner slot at the corner

to avoid the corner from popping out. Install the rest in turn.)

5) Cut off the excessive mesh.

6) Use clips to clamp the outer frame of the

screens window, Tear off the adhesive film

from the clip, Attach to the magnetic strip

of the window frame about 30cm from

the top, Then press the clips and the

surrounding frame, and finish.