STEP 1:

Attach Pressure Washer Pump Protector to the water inlet hookup on the pressure washer

STEP 2:

Press down on the can to dispense fluid

Step 3:

Once liquid exits pump, it is now protected

Step 4:

Remove hose and store pressure washer

STA-BIL Pump Protector - More Information

Have a pressure washer? Store it in a cold place in the winter months? What happens if all the water is not drained out of your pressure washer? These are all great questions with one awesome solution! STA-BIL Pump Protector. Worst case scenario, you go to get your pressure washer out in the spring and you realize the pump is no longer building pressure, what could have went wrong? Most likely all the water in the system from last usage season froze and either damaged the pistons and seals in the pump, or the water froze and cracked the pump leaving your pressure washer useless.

The solution is STA-BIL Pump Protector. This protects your pressure washer pump and other internal components, like the pistons and seals during storage season. It also provides anti-freeze protection, so you no longer have to stress about that pump freezing. Not only that, but provides great lubrication for all the moving parts and prevents the buildup of harmful water mineral deposits.

STA-BIL Pressure Washer Pump Protector

STA-BIL experts recommend attaching the hose on the Pump Protector can to the inlet on the pressure washer (where the water hose connects). Next, press the button on the can to disperse the fluid into the pressure washer, once fluid begins to exit the pump, it is now protected. Remove the hose and store your pressure washer.