The AquaForte DM-Low Voltage series pond pumps are based on the DM-series pumps. Thanks to the low voltage, the pumps are also suitable for swimming ponds. A pump with quiet operation, a synchronous motor and a wear-resistant ceramic shaft. In addition, the pump itself protects against dry running and clogging. If water does not reach the rotor, the pump switches off. When the impeller is blocked, the pump goes into a locking position and only turns on again when the blockage is eliminated. This prevents the engine from burning out.

The pump can be used for watercourses, waterfalls, fountains and filters. The pump can be installed in both dry and underwater operation. When setting up dry, it is important that the pump is placed below the water level. This pump series can transport dirt particles up to a size of 6 mm. The power of the pump is not adjustable. Please note that the input and output of this low voltage series has a 1¼ inch male thread, with the exception of the DM-12,000 low voltage, here the connector is a 2 inch male thread.