Paint spray gun compatible with Makita 18V battery, suitable for wall, fence, door, window, metal rust, ceiling, car repair, altitude operation, etc.

Package includes:

1 x Paint Sprayer (Battery not included)

1 x 1000ml Spray Container

2 x nozzles 1.8 mm, 2.5 mm.

1 x Cleaning Brush

1 x Nozzle Cleaning Needle

1 x user manual (may not English language not guaranteed).

Frequently Asked Questions:

Q1:Why is the paint sprayed unevenly?

A: If the dilution ratio is too thick, uneven results will be achieved. It is recommended to set the colour to a thinner ratio of 3:1.

Q2:Why does the color still look uneven after dilution?

A: It is recommended to clean the front half of the machine head. If it is clogged, it will spray or cannot spray.

Q3 Improper spraying:

A1: Please check whether the material viscosity is too high, whether the flow regulator is set too high, whether the nozzle is clogged and whether the nozzle size is appropriate.

A2: Please check whether the seal is installed correctly, whether the nozzle is tight and whether the container is leak-proof.

Please note:

1. Adjust the viscosity of the paint / latex paint before spraying. The electric spray gun is suitable for liquids with a viscosity range of 20-40 seconds that can flow out of the funnel.

2. Test the paint before use with the included viscosity funnel to determine if it is too sticky. If it is too sticky, it must be diluted with appropriate thinner.

3. After the spray gun has been sprayed, it should be cleaned in time to prevent the paint or paint from clogging the nozzle holes after drying, which extends the life of the machine and makes the use more convenient next time.

4. After spraying, the paint should be cleaned in time to prevent the paint from drying out. This locks the nozzle for later use and extends its service life.