Sheets: 1000 Sheets
Materials: paper
Colors: 20 colors
Steps to make a star origami:
1.Bring the right end of the paper over and down,Bring the bottom end up and over the left end,Now that you have a loop, feed the top end behind and through the hole,Make the Knot of the Star
2.Continue to pull the end through the loop, also gently pull the bottom end to tighten the knot,flattening it at the same time,The end of the paper strip on the left should be much longer than the end on the right, Fold the excess end behind. You do not need to cut it off but you can do it if it's too long.
3.Fold the end on the left behind, keeping the bottom edge aligned with the bottom edge of the shape in the center.Continue wrapping the pentagon. Fold the strip on top, over to the top left.Again wrapping the pentagon, fold the strip down behind to the bottom.Fold the strip up and over to the right.Fold the strip over behind to the left and continue until you only have a small section left.Insert the end of the strip inside the pocket.(If your strip is just a bit too long, cut it or tear it off)
4.Now inflate the star. Use your index finger and thumb to pinch in one of the points of the star.Rotate the star and gently do the same on all of the points.You can get different results by pinching more or less at this stage.