Built-In Imperial And Metric Scales and Board Thickness Settings

The built-in scales allow you to easily measure the thickness of your work piece.

There are four common board thickness settings built into the pocket jig: 1/2”, 3/4”, 1” and 1-1/2” (12, 19, 27, 38mm).

Easy readout arrow to help define your board thickness setting.

Spring Loaded Sled Adjustment Button

Easily adjust to your board thickness setting with the single sled design and sled adjust button.

Hardened Steel Bushings

Tight tolerances between the bushing and the drill bit, reduce tear-out and create a clean and precise pocket hole on the first try,

Recessed Clamp Pocket With Magnet

Helps to keep the clamp in the same position as you move to different locations.

With the stronger rare earth magnet, you can easily clamp the jig from one location to another.

Built-In Depth Setting

Simply set the stop collar in the recess and adjust so the step of the bit, is to the corresponding line.

3/8″ Split Design Stop Collar With Flat

The split design prevents slipping of the set screw when tightened and the flat prevents the bit from rolling.

Includes hex key.

Quick Change Connector

Quickly and easily change from drilling to driving.

Accepts all 1/4″ hex bits.

3” And 6” Magnetic T20 Torx Drivers

For maximum torque settings without stripping, to allow pocket screws to align with maximum precision.