2 Shoji Sheets.
Material/Composition:
80% Pulp, 12% Rayon, 5% Polyester, 3% Vinylon Binder, Contains Fluorescent Agents, UV Protection
This product consists of PP, PE, paper, PE, and PP. The paper content is shown above.
Note:
Do not stick with shoji glue.
Please make sure to use double-sided tape (0.2 inches x 65.6 feet (5 mm x 20 m) sold separately).
This product has a smooth surface on both sides.
● If you stick this product as the instructions for use, the pattern will be wrapped around the inside of the room. You can also reverse the inside out if you turn it on and off again.
This product is virtually unstretchable, so you can not adjust the tarumi later. Please stick with care to avoid any talumi.
If the shoji frame is unravely, rough or unravely, it may come off. Make sure to lay flat with sandpaper before sticking.
If the shoji frame is moist or there is still a "remover" or "detergent" remain, so please dry the frame thoroughly before pasting.
When the temperature is below 30°F (10°C), it will become difficult to adhere to the product, so please warm the room before sticking.
This product is made of plastic, so it may be condensed.